Technical File Information

Technical File A Technical File as specified by Annex VII of the Machinery Directive must be made available to the market surveillance authorities in accordance with Part 7A of Schedule 2 of Supply of Machinery Regulations 2008.

Annex VII of the Machinery Directive 2006/42/EC requires a Technical File to contain the following information.

Construction file:

  1. A general description of the machinery
  2. The overall drawing of the machinery and drawings of the control circuits, as well as the pertinent descriptions and explanations necessary for understanding the operation of the machinery
  3. Full detailed drawings, accompanied by any calculation notes, test results, certificates etc., required to check the conformity of the machinery with the essential health and safety requirements
  4. The documentation on risk assessment demonstrating the procedure followed
  5. A list of the essential health and safety requirements which apply to the machinery
  6. The description of the protective measures implemented to eliminated identified hazards or to reduce risks and, where appropriate, the identification of residual risks associated with the machinery
  7. The standards and other technical specifications used, indicating the essential health and safety requirements covered by these standards
  8. Any technical report giving the results of the tests carried out either by the manufacturer or by a body chosen by the responsible person
  9. A copy of the instructions for the machinery
  10. Where appropriate, the declaration of incorporation for included partly completed machinery and the relevant assembly instructions for such machinery
  11. Where appropriate, copies of the EC declaration of conformity of machinery or other products incorporated into the machinery
  12. A copy of the EC declaration of conformity

Procedures for ensuring series built machines remain in conformity:

  1. The internal measures that will be implemented to ensure that the machinery remains in conformity with the provisions of the Directive

The manufacturer must carry out necessary research and tests on components, fittings or the completed machinery to determine whether by its design or construction it is capable of being assembled and put into service safely. The relevant reports and results shall be included in the technical file.

HSENI as the Market Surveillance Authority can request presentation of the Technical File within a reasonable timeframe. Failure to present the required information may give grounds for doubting the conformity of the machinery (and may constitute an offence under Regulation 7(2)b of Supply of Machinery Regulations 2008).

For more information please email HSENI at: